Value Creation Plan for PE-Backed Manufacturers

Value Creation Plan for PE-Backed Manufacturers

A value creation plan is the short list of operating changes a private equity owner expects a portfolio company to deliver during the hold, with an owner, a measure and a date for each.

For a manufacturer, most of the levers sit on the plant floor: capacity, yield, equipment effectiveness, labor, procurement and working capital. A good plan also shows how each change will look to the buyer at exit.

This guide explains what goes into the plan, how to start it in the first 100 days and how to keep it alive until the sale.

Key takeaways

  • A value creation plan names the operating levers, owners, measures and dates. It is not a strategy deck.
  • In manufacturing, many of the levers sit in the plant, not in the head office.
  • The first 100 days set the baseline and the first wins, not the whole plan.
  • The board needs a few measures every month, tracked the same way every time.
  • Every lever should be written with the exit buyer in mind.

What is a value creation plan?

A value creation plan turns the investment thesis into work.

The thesis says why the business will be worth more at exit. The plan says what will change, who will change it and how everyone will know it happened.

It is usually agreed between the private equity owner, the operating partner and the management team, often starting from the findings of due diligence.

What a value creation plan is not

  • Not a budget. A budget forecasts results; the plan lists the changes that will produce them.
  • Not a list of everything. A plan with twenty priorities has none. Most teams can carry a handful at once.
  • Not a one-time document. It is reviewed and updated as results come in.

The operating levers in a manufacturing plant

Each lever below can move earnings, cash or risk. The plan should pick the few that matter most for this business.

Capacity and throughput

Find the real constraint and release capacity from the equipment you already own before buying more. A capital request for more capacity should wait until the constraint has been tested on the current lines.

Yield, scrap and quality

Lower scrap and rework improve margin without new sales. Track scrap at the constraint first, because every lost unit there is lost output, not just lost material.

OEE (overall equipment effectiveness)

OEE combines availability, speed and quality for a machine or line. Measuring it the same way at every site shows where losses sit and whether improvements hold.

See our operational excellence work for how we approach it.

Labor productivity and scheduling

Overtime that hides a constraint, unbalanced shifts and long changeovers all show up in labor cost. Look at the constraint and the changeover method before any change in headcount.

Procurement and suppliers

Supplier terms, specifications and alternate sources can reduce material cost, a large cost line in many plants.

Working capital

Inventory policy, payment terms and collections turn into cash, which private equity owners watch closely. Start with slow-moving stock and safety stock rules, which rarely affect service when done with the planners.

Building the plan in the first 100 days

The first 100 days set the baseline, confirm which levers the diligence supports and deliver a few early results. Treat Day 100 as the first review of the value creation plan, not its end.

Our guide to the 100-day plan in private equity covers the first 100 days in detail.

Setting targets: ranges, not single numbers

Write each target as a range with a date, measured against the agreed baseline. A range gives the board an honest view of what is likely.

When the evidence changes, move the range and record why.

Measures the board should see every month

Give each measure a one-line definition: what counts, which system it comes from and who reports it. Keep the list short:

  • Safety
  • On-time delivery
  • Scrap or yield
  • OEE on the constraint equipment
  • Labor hours per unit
  • Inventory and cash conversion
  • Progress on each lever against its date

If a measure changes definition, note it on the report. A trend built on changing definitions cannot be defended in a sale process.

Keeping the plan alive between board meetings

Plans fade when they live only in board packs. Three habits keep them working:

  • A weekly review of each lever with its owner, in the plant, not only in a meeting room.
  • Daily performance boards on the floor that match the measures the board sees.
  • One person accountable for the whole plan, often the operating partner or the COO.

When synergies from add-on acquisitions are part of the plan, track them the same way. Our guide to synergy tracking after an acquisition shows a simple method.

When to update the plan

Revisit the plan when a lever is finished, when evidence shows a lever will not deliver, or when an add-on changes the business. Replace finished levers with the next ones from the thesis.

Keep a short record of each change, so the history reads clearly in a sale process.

Common value creation plan mistakes

  • Choosing levers the diligence did not support
  • Setting targets before the baseline is agreed
  • Keeping a lever alive after the evidence says it will not deliver
  • Reporting activity, such as projects started, instead of results

How the plan sets up exit readiness

A buyer will ask how each improvement was measured and whether it still holds on every shift. Levers documented as they were delivered answer that quickly. Near the end of the hold, the exit readiness checklist helps score the business the way a buyer will.

When a sale is closer, our M&A exit readiness work looks at the operation through a buyer's eyes.

Frequently asked questions

What is a value creation plan in private equity?

It is the list of operating changes a private equity owner expects during the hold period, with an owner, a measure and a date for each. It turns the investment thesis into work the management team can deliver.

Who writes the value creation plan?

Usually the private equity owner, the operating partner and the management team together, often starting from the findings of due diligence.

How is a value creation plan different from a 100-day plan?

The 100-day plan is a short burst of work right after close. The value creation plan is the longer list of operating changes that the board tracks until the sale.

What are the main value creation levers in a manufacturing company?

Capacity and throughput, yield and quality, OEE, labor productivity, procurement and working capital. Most plans focus on the few that matter most for the business.

Building a value creation plan for a manufacturing portfolio company? Schedule a Call or call 717-707-7826. See how our operational excellence work supports it.