Operational Due Diligence vs Quality of Earnings: What Each One Covers

Operational Due Diligence vs Quality of Earnings: What Each One Covers

A quality of earnings review tests whether the earnings in the deal model are accurate and repeatable. Operational due diligence tests whether the operation behind those earnings can keep producing them, and deliver the plan, under new ownership.

In a manufacturing acquisition you usually need both, because each one answers a question the other cannot.

This guide compares quality of earnings with financial, commercial and operational due diligence, shows where the numbers and the plant can disagree, and explains how the findings feed the first 100 days.

Key takeaways

  • Quality of earnings looks at the numbers. Operational due diligence looks at the plant that produces them.
  • Financial due diligence explains past results; commercial due diligence tests the market.
  • Capacity limits, deferred maintenance, quality problems and key-person risk rarely show clearly in the financials.
  • The reviews are strongest when the accounting and operations teams share findings during the deal.
  • Operational findings should become owned actions in the 100-day plan.

What is the difference between operational due diligence and quality of earnings?

Quality of earnings asks whether reported earnings are accurate, sustainable and properly adjusted. Operational due diligence asks whether the plant, people, suppliers and systems can deliver those earnings and the growth in the plan.

A quality of earnings report is usually prepared by an accounting firm. Operational due diligence is usually done by operations specialists who walk the plant and review production, quality and supply chain records.

In many deals the quality of earnings report sits at the center of financial due diligence. Some buyers treat the two as one review.

The four main reviews compared

Each review answers a different question. Use this comparison to see what you are covered for, and what you are not.

For the full list of reviews a buyer can run, see types of due diligence in a manufacturing acquisition.

Quality of earnings

  • Main question: are the earnings accurate and repeatable?
  • Usually done by: an accounting firm
  • Main inputs: accounting records, monthly results and proposed adjustments
  • Main output: adjusted EBITDA and a view of earnings quality
  • What it can miss: whether the plant can produce the volume behind the numbers

Financial due diligence

  • Main question: do the financial statements and balance sheet hold up?
  • Usually done by: an accounting firm
  • Main inputs: financial statements, working capital and debt-like items
  • Main output: findings on working capital, debt and financial risk
  • What it can miss: how the operation actually runs

Commercial due diligence

  • Main question: are the market, customers and growth story sound?
  • Usually done by: strategy or market research advisers
  • Main inputs: market data, customer interviews and competitor review
  • Main output: a view of the market and the revenue outlook
  • What it can miss: whether the plant can serve the forecast demand

Operational due diligence

  • Main question: can the operation deliver the plan under new ownership?
  • Usually done by: operations specialists
  • Main inputs: plant visits, production and quality records, and interviews on the floor
  • Main output: capacity, cost and risk findings, with Day One and integration priorities
  • What it can miss: detailed accounting adjustments

EBITDA means earnings before interest, taxes, depreciation and amortization. Buyers often price manufacturing deals on an adjusted version of it, which is why the adjustments matter so much.

What a quality of earnings report tells you

A quality of earnings report tests whether the earnings used to price the deal are accurate and repeatable. It typically adjusts reported EBITDA for one-time, owner-related and non-recurring items and looks at revenue and margin trends.

A typical report covers:

  • Adjusted EBITDA, with each adjustment explained
  • One-time, owner-related and non-recurring income and expenses
  • Revenue and margin trends by customer, product or period
  • Net working capital and what level is normal for the business
  • Debt-like items that the price should account for

This is essential work, and it is mostly backward-looking. It tells you what the business earned, not whether the plant can keep earning it at a higher volume.

What operational due diligence tells you

Operational due diligence tests the operation behind the numbers: capacity, equipment condition, quality system, supply chain, people, systems and costs. In a manufacturing deal, it answers whether the plant can deliver the plan the buyer is paying for, and what that will take.

These are the areas our operational due diligence covers in manufacturing deals:

  • Demonstrated capacity compared with nameplate capacity and the volume in the model
  • Equipment condition, deferred maintenance and the capital needed to sustain and grow
  • Quality system health, corrective actions and customer complaints
  • Supplier concentration, single-source parts and inventory accuracy
  • Leadership depth and knowledge held by one or two people
  • Systems, data reliability and manual workarounds
  • Day One risks and integration priorities

For the detailed questions behind each area, see the manufacturing due diligence checklist.

Where the numbers and the plant disagree

The most expensive surprises sit in the gap between the financials and the floor. A margin can look strong because maintenance was deferred, and a growth plan can assume capacity the plant has never shown.

  • Deferred maintenance. Lower maintenance and capital spending improves earnings today but leaves a bill for the buyer later.
  • Capacity on paper. The model assumes nameplate capacity, or overtime the workforce cannot sustain.
  • Quality costs out of sight. Rework, scrap and customer credits can be spread across other accounts.
  • Key-person dependence. Earnings depend on a plant manager or a few technicians who could leave.
  • Inventory that does not reconcile. Counts, valuations and system records disagree, which affects both working capital and planning.

None of these shows up clearly in a single financial schedule. Each one can change the price, the structure or the integration plan.

Six questions to ask before you rely on the numbers alone

Before you rely on a quality of earnings report alone, test the operational assumptions inside it. These six questions show quickly whether you need an operational review.

  1. Which adjustments depend on how the plant runs, such as normalized maintenance or overtime?
  2. Has anyone compared the volume in the model with the output the plant has actually achieved?
  3. Is maintenance and capital spending in the adjusted figures realistic for the age of the equipment?
  4. Are scrap, rework and customer credits visible as separate lines?
  5. Do inventory counts agree with the system and the balance sheet?
  6. Which customers, suppliers or key people could leave after the sale?

If the answer to any of these is unclear, the operational review is where you find out.

When you need both

You need both when the price depends on future volume, margin improvement or synergies that the plant must deliver. That is common in manufacturing acquisitions, especially private equity (PE) platform and add-on deals.

Operational due diligence matters most when:

  • The growth plan needs more output than the plant has produced.
  • The synergy case depends on combining plants, suppliers or systems.
  • The products are regulated, so the condition of the quality system affects value.
  • Diligence time is short and the seller controls access.
  • The buyer plans to integrate the business quickly after close.

Wharton's analysis of why acquisitions disappoint names poorly executed due diligence as one of the main causes, including diligence that looks for confirmation of a deal the buyer already wants. Running the financial and operational reviews side by side is a practical check against that.

How to run them together

Share findings between the accounting and operations teams during the deal, not after. Each review makes the other more useful.

  1. Agree the three or four operational questions that could change the price, the structure or the plan.
  2. Give both teams the same deal thesis and the same data room.
  3. Trace each EBITDA adjustment and each synergy to the part of the operation behind it.
  4. Hold a joint review of findings before the price is final.
  5. Carry the open findings into the Day One plan and the 100-day plan.

Sellers can run the same operational tests on their own plant before going to market. Our exit readiness checklist for manufacturing owners lists them.

How operational findings feed the first 100 days

Every material operational finding should become an action with an owner, a date and evidence before close. That is how diligence protects value after the deal, not only before it.

Use the 100-day manufacturing integration checklist to turn findings into owned actions. Diligence findings are most useful when the people who found them also help plan the post-merger integration.

Frequently asked questions

What is the difference between operational and financial due diligence?

Financial due diligence examines reported results, the balance sheet and the quality of earnings. Operational due diligence examines the plant, people, suppliers and systems that produce those results, and whether they can repeat and improve them under new ownership.

Most manufacturing buyers need both.

Who performs a quality of earnings review?

Usually an accounting firm, hired either by the buyer (a buy-side report) or by the seller before a sale (a sell-side report). Operational due diligence is usually done by operations specialists who visit the plant and review production, quality and supply chain records.

When should operational due diligence start?

Most operational reviews run after a letter of intent is signed, during the exclusivity period. A short conversation before that, to agree the key operational questions, helps the review move faster and focus on what could change the price or the plan.

Can operational due diligence change the purchase price?

It can. Findings such as deferred maintenance, capacity below the plan or quality problems can lead to a price adjustment, a different deal structure, specific protections in the purchase agreement or a changed integration plan.

Not every finding changes the price, but every material one should be known before signing.

Evaluating a manufacturing acquisition?

We help buyers test the plant behind the numbers before the price is final. Talk with our team about the operational questions in your deal.

Schedule a Call or call 717-707-7826.